-
1 - test the water level in the radiator must be the water level at least about 5 cm from the cover of the radiator and, if necessary, should be added clean water, leaving a vacuum in the neck of the radiator to give a chance to stretch out, which happens to the liquid inside it and must conduct that operation in the early morning and the engine cold either If there is a need to add water and the engine hot you should note added in small quantities to the radiator and the engine running until the mixing cold water with hot water until the assent broken engine parts as a result of addition of cold water on the parts of a hot lead to the contraction sudden engine parts multi-material leads to cracks does not see the naked eye but show up with the continued operation of the engine.
2 - to reveal all the links there may be leakage from the water cooling device.
3 - Detection of gas bubbles with water cooling and if found, there is either a leaking exhaust system or air intake and this process must be disclosed before the arrival of water to the boiling point at the start of any operation of the engine in the early morning.
4 - detect the presence of oil on the surface of the radiator water, it indicates the leakage of engine oil to the cooling cycle "of a fracture or cracks in the engine."
5 - If the material is available to you against rust crisis must start with the amount of water until the radiator Activity prevent rust, which hinders the passage of water in the radiator tubes high.
6 - in areas of extreme cold, add the materials against the water from freezing to reduce the freezing temperature of water in areas of high heat to raise the boiling point of 100 degrees Miaah.
7 - Test the course of pulling the pump and, if necessary, it must be stretched through the hoop with the Dynamo the tractor vehicle.
8 - if needed to pump water lubrication should add the part of the chair mounted on it. And always the fan and pump run one column and is often a long-term lubrication.
9 - After a certain operating, it must change the water radiator another washing radiator with water under pressure (from tap water) to get rid of impurities and corrosion commentator in the radiator and this process according to the descriptions in the catalog operation of the tractor and the method used to decode parts of the cooling. It used always to be the engine running the mini before starting the decoding of any part or empty the water so that all the impurities mixed with water and then begin the process of change continued for a period and have put a water hose the ransoming of the radiator and leave the tap open and then close the tap and fill out the radiator.
1 - test the water level in the radiator must be the water level at least about 5 cm from the cover of the radiator and, if necessary, should be added clean water, leaving a vacuum in the neck of the radiator to give a chance to stretch out, which happens to the liquid inside it and must conduct that operation in the early morning and the engine cold either If there is a need to add water and the engine hot you should note added in small quantities to the radiator and the engine running until the mixing cold water with hot water until the assent broken engine parts as a result of addition of cold water on the parts of a hot lead to the contraction sudden engine parts multi-material leads to cracks does not see the naked eye but show up with the continued operation of the engine.
2 - to reveal all the links there may be leakage from the water cooling device.
3 - Detection of gas bubbles with water cooling and if found, there is either a leaking exhaust system or air intake and this process must be disclosed before the arrival of water to the boiling point at the start of any operation of the engine in the early morning.
4 - detect the presence of oil on the surface of the radiator water, it indicates the leakage of engine oil to the cooling cycle "of a fracture or cracks in the engine."
5 - If the material is available to you against rust crisis must start with the amount of water until the radiator Activity prevent rust, which hinders the passage of water in the radiator tubes high.
6 - in areas of extreme cold, add the materials against the water from freezing to reduce the freezing temperature of water in areas of high heat to raise the boiling point of 100 degrees Miaah.
7 - Test the course of pulling the pump and, if necessary, it must be stretched through the hoop with the Dynamo the tractor vehicle.
8 - if needed to pump water lubrication should add the part of the chair mounted on it. And always the fan and pump run one column and is often a long-term lubrication.
9 - After a certain operating, it must change the water radiator another washing radiator with water under pressure (from tap water) to get rid of impurities and corrosion commentator in the radiator and this process according to the descriptions in the catalog operation of the tractor and the method used to decode parts of the cooling. It used always to be the engine running the mini before starting the decoding of any part or empty the water so that all the impurities mixed with water and then begin the process of change continued for a period and have put a water hose the ransoming of the radiator and leave the tap open and then close the tap and fill out the radiator.
No comments:
Post a Comment