Maintenance needed to get rid of the cooling device in the following:

-
1 - test the water level in the radiator must be the water level at least about 5 cm from the cover of the radiator and, if necessary, should be added clean water, leaving a vacuum in the neck of the radiator to give a chance to stretch out, which happens to the liquid inside it and must conduct that operation in the early morning and the engine cold either If there is a need to add water and the engine hot you should note added in small quantities to the radiator and the engine running until the mixing cold water with hot water until the assent broken engine parts as a result of addition of cold water on the parts of a hot lead to the contraction sudden engine parts multi-material leads to cracks does not see the naked eye but show up with the continued operation of the engine.
2 - to reveal all the links there may be leakage from the water cooling device.
3 - Detection of gas bubbles with water cooling and if found, there is either a leaking exhaust system or air intake and this process must be disclosed before the arrival of water to the boiling point at the start of any operation of the engine in the early morning.
4 - detect the presence of oil on the surface of the radiator water, it indicates the leakage of engine oil to the cooling cycle "of a fracture or cracks in the engine."
5 - If the material is available to you against rust crisis must start with the amount of water until the radiator Activity prevent rust, which hinders the passage of water in the radiator tubes high.
6 - in areas of extreme cold, add the materials against the water from freezing to reduce the freezing temperature of water in areas of high heat to raise the boiling point of 100 degrees Miaah.
7 - Test the course of pulling the pump and, if necessary, it must be stretched through the hoop with the Dynamo the tractor vehicle.
8 - if needed to pump water lubrication should add the part of the chair mounted on it. And always the fan and pump run one column and is often a long-term lubrication.
9 - After a certain operating, it must change the water radiator another washing radiator with water under pressure (from tap water) to get rid of impurities and corrosion commentator in the radiator and this process according to the descriptions in the catalog operation of the tractor and the method used to decode parts of the cooling. It used always to be the engine running the mini before starting the decoding of any part or empty the water so that all the impurities mixed with water and then begin the process of change continued for a period and have put a water hose the ransoming of the radiator and leave the tap open and then close the tap and fill out the radiator.

Detected on the front wheel of any of the "Bush"

Detected on the front wheel of any of the "Bush"

Lubricating moving parts in the tractor

Before the start of lubricating any moving part in the jars do a good cleaning with a cloth - and using some of the diesel if necessary.
Fat of the calf and then pivots the front and rear as well as links on the wheel front

Oilcan

- Maintenance of dynamo and electric motor: -

Always that of the usual chairs dynamo and motor oil containing the life of the dynamo or motor, but in some cases containing lubricated and in this case should be added as part of the fat I need to do so.
- And can be made to clean the file dynamo or motor through the use of very soft abrasives and brushes can be changed "Alcherbon" If there has eroded.
In modern models of engines there instead of the dynamo generator, which operates under a continuous stream. He found another type alternator used with AC power and size of the small and does not require maintenance, such as dynamo and gives high intensity of electric current at low speeds.

Air filter with oil bath

Air filter with oil bath:

Must be disclosed on the level of oil in a pot and filter, and also for the amount of dust reserved.
If the engine under normal operating conditions the process should be conducted twice a day.
Crisis, the steps of filter maintenance:
1 - Removing the oil pan of the body of the filter, and must not mention that such a process while the engine is running, but must be carried out when the engine is turned off completely.
2 - disclosure of the amount of dust was reserved if for example a depth of 1 cm should change the oil and can be inferred from that by the viscosity of the oil. It is usual that the number of oil in air filter is the same as the number of oil used Vamahrk.
3 - If there is a quantity of oil and impurities stuck to the wall of the filter or on the filter should be laundered fuel diesel engine "diesel"
4 - a bowl full of oil until the mark established Katlujat most of the operation of the engines found the wife of oil used in the filter
5 - Link to pack the oil filter in the body of a tight linkage.
6 - to detect leakage of air from the filter to the cylinder openings there may be a small air leak to the cylinder without passing through the filter ventilation.

Warning:

- Do not use gasoline or volatile substances in the cleaning process due to ease of ignition

If you use oil for his wife's higher than the specific viscosity, it works on the throttle of the engine air intake of the cylinder and this more than the consumption of fuel.
In the case of the use of oil is lighter too, there is damage to the engine to pull the oil from the filter to the cylinder and this reduces the level of the oil filter and thus less efficient filter to purify the air of impurities and also if it has reached the oil to the cylinder, it is happening to him, flammable, as is happening in diesel engines in particular such as diesel fuel and burning the user, causing a sudden rise in engine speed.
Warns not to use engine oil used in the air filter due to the presence of petroleum products is lit with a consequent low level of oil as a result of evaporation in addition to containing carbon and impurities.
Do not add oil to the filter in excess of specified is not taking place until the increase in fuel consumption in gasoline engines and thus have the ability in diesel engines